TRENDnet TPE-104GS Gigabit PoE Splitter
Gigabit PoE Splitter |
TPE-104GS (Version v1.0R)
|
TRENDnet’s Gigabit PoE Splitter, model TPE-104GS, networks a non-PoE device in a remote location using
a PoE network connection. The TPE-104GS splits a Gigabit PoE connection into separate power and Gigabit
data sources. A handy toggle switch adjusts output power to 5, 7.5, 9, or 12 Volts in order to match non-PoE
device power requirements. The included 2 and 2.5mm jumper cables increase power pin device compatibility.
|
PoE Compatible with PoE (802.3af) network connections |
Gigabit Ethernet Supports Gigabit network speeds | |
Adjustable Dip Switch Capacity
non-PoE device power requirements |
|
Jumper Cables with the non-PoE networked device |
|
No Power Adapter The TPE-104GS is powered by the PoE connection |
|
Mounting Built-in mounting points increase installation flexibility |
|
Standards
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3ab
- IEEE 802.3af
Device Interfaces
- 1 x Gigabit data/power in port
- 1 x Gigabit data out port
- 1 x Power out port
- LED indicators
- Adjustable output power DIP switch (5 V, 7.5 V, 9 V, 12 V)
Data Transfer Rate
- Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
- Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
- Gigabit: 2000Mbps (full duplex)
Jumper Cable
- 2.0 to 2.0mm
- 2.0 to 2.5mm
Power
- PoE network cable input: 48VDC, 0.38A
- Output (Volts): 5 (2A), 7.5 (2A), 9 (1.7A), 12 (1.2A)
- Consumption: 0.3 Watts (max.)
Operating Temperature
- 32 - 113°F (0 – 45°C)
Operating Humidity
- Max. 90% non-condensing
Dimensions
- 2.8 x 1.8 x 1 in. (70 x 45 x 25mm)
Weight
- 2.1oz (60g)
Certifications
- CE
- FCC
- 1 x Gigabit data out port ,
- 1 x Gigabit data/power in port ,
- 1 x Power out port ,
- Adjustable output power DIP switch (5 V, 7.5 V, 9 V, 12 V) ,
- LED indicators
- 5 V (2 A), 7.5 V (2 A), 9 V (1.7 A), 12 V (1.2 A)
- 70 x 45 x 25 mm (2.8 x 1.8 x 1 in.)
- 60 g (2.1 oz.)
- 0.3 Watts (max.
- 32 - 113°F (0 – 45°C)
No reviews found