UPS with dual conversion technology Eaton EX offers protection for servers, networks and data repositories. The advantage of this UPS is the ability to increase backup time to several hours by adding extra battery modules. The battery itself on the UPS can be switched on and off without interruption. In addition, the EATON EX has a graphical LCD display and can be mounted both in a rack and separately as a Tower. It uses the built-in Power share system, which is used for remote control of load segments (reboot, step-by-step, switch-off). The UPS uses an automatic battery test to inform us about the need to replace the battery in time. Included in the delivery is the Eaton Software Suite, which allows us to easily manage and manage the device remotely. 

Suitable for:

• Servers, storage and network devices 
• VoIP telephony devices 
• Medical devices - industrial processes 

Parameters and specifications:

Technology: Double-conversion on-line and with automatic bypass and power factor correction 
UPS: with rack mount kit + HotSwap MBP 
Configuration: Rack / Tower 
Power (VA / W): 3000 VA / 2700 W 
Backup time: 
    For the UPS itself: 
        • With 50% load: 15 min. 
        • For 70% load: 10 min. 
    + 1 EBM: 
        • For 50% load: 60 min. 
        • For 70% load: 40 min. 
    + 4 EBM: 
        • With 50% load: 190 min.
        • With 70% load: 150 min. 
User interface: 
        • Communication ports: USB, RS232, relay contacts, miniature terminal board 
        • Plug-in position: NMC Minislot card, NMC ModBus / JBus or MC Contacts / Serial card 
        • Display: Graphic LCD display 
Input: C20 
Outputs: 8 x C13, 1 x C19, 4 sockets FR 
Powershare remote control sockets: 2 groups (2 x sockets C13) 
Input voltage: 100/120/160/184 V to 284V 
Output voltage: 230 V (adjustable 200/208/220/240 V) 
Input range Frequency: 40-70 Hz 
Output frequency: 50/60 Hz aut. detection 
Dimensions: 440 x 131 x 490 mm 
Weight: 30 kg