DrayTek VigorLTE 2862Ln Quad
ضمان الوكيل .
SMS تنبيهات .
استبدال واسترجاع .
طرق دفع مختلفة .
أفضل الأسعار .
DrayTek V2862LN-K WiFi Routers (N)
The DrayTek VigorLTE 2862Ln Quad-WAN ADSL2+/VDSL2 WiFi Router features the same specification as the standard Vigor2862 product with the addition of built-in 4G (Cellular/LTE) connectivity, compatible with all UK/Ireland cellular networks (apart from 'Relish'). As well as connectivity to the 4G (LTE) networks, the Vigor 2862L series provides backward compatibility to 3G networks for areas or networks where 4G isn't available. Your 3G/4G can provide your sole/primary Internet connection, with optional fallback (backup) to another WAN connection (DSL or Ethernet fed) or 3G/4G can be the backup to your primary DSL/Ethernet connection.
Key Features
- Built-in 3G/4G LTE Cellular Connectivity.
- LTE Speed Up to 150/50 Mbs/s (RX/TX).
- Built-in standard SIM slot.
- 5-Port Gigabit LAN.
- 5 WAN Connectivity methods:
- ADSL/VDSL.
- 3G/4G/LTE (Internal SIM slot).
- 3G/4G/LTE (Optional USB Modem 1).
- Ethernet (RJ45, switchable with LAN P5).
- Wireless WAN (to mobile hotspot, café etc.).
- Send and receive text messages (SMS).
- Send Texts from GUI or Telnet.
- Status reports by SMS (text message).
- Compatible with all main UK/IE 3G/4G Providers.
- Built-in 802.11n Wireless.
Includes two LTE aerials
The DrayTek VigorLTE 2862Ln Quad-WAN ADSL2+/VDSL2 WiFi Router comes with two LTE aerials (antennae) which can rotate and tilt for optimum reception. The included extension bases provide a 1M extension cable to allow optimum positioning, avoiding obstructions, cabinets or equipment. On the DrayTek VigorLTE 2862Ln Quad-WAN ADSL2+/VDSL2 WiFi Router, there are two additional aerials. The WiFi (outer two, white) and LTE aerials (inner two, black) have different plugs to ensure that that the correct socket is used.
The Vigor 2862Ln using 3G/4G cellular connectivity is ideal for:
- Backup to your primary Internet feed (ADSL, cable etc.)
- Providing lower cost broadband than a fixed line solution
- Areas without fixed line broadband access
- Compatible with a wide range of 3G modems/phones
- Temporary Locations
- Mobile Homes
- Locations on the move - coaches, trains
- Fairgrounds and temporary exhibitions
- Outdoor locations (the router and modem itself must be indoors!)
- Disaster Planning and High Availability
Text Message (SMS) Control and Reporting
As a cellular network device, the DrayTek VigorLTE 2862Ln Quad-WAN ADSL2+/VDSL2 WiFi Router takes advantage of text messaging (SMS) to allow remote interrogation and control. Sending a simple command ('router status') to the router from a regular cellphone will get an instant reply telling you about the router's current status, firmware version, each WAN port's IP address, status and data volumes. Another command ('router reboot') enables you to reboot the router remotely. For security, the commands require a password and a whitelist can allow messages only from your specified phones preventing unauthorised persons from being able to send rogue commands. See the screenshot on the right for examples.
The DrayTek VigorLTE 2862Ln Quad-WAN ADSL2+/VDSL2 WiFi Router can also send and receive text messages from its web interface; checking incoming messages allows you to read service messages, for example that you are low on credit but it's also a quick way to type a message to anyone else's mobile phone from your web browser. The facility is also useful to confirm your credit balance (for PAYG SIMs) or to use top-up vouchers (where these are accepted by SMS). You can also send text messages from the command line via a telnet connection - more suited for automation/integration.
- Physical Interfaces
- LAN Ports (Switch)
- 5 X Gigabit Ethernet (1000Mb/s) Ports
- WAN Ports:
- WAN1 : ADSL/VDSL, RJ11
- WAN2 : Gigabit Ethernet (1000Mb/s) Ethernet for load balance and WAN failover (Switchable as Ethernet LAN Port 5).
- WAN3 : USB 2.0 Port for 3G/4G Modem, thermometer or Printer
- WAN4 : USB 2.0 Port for 3G/4G Modem or Printer
- Wireless WAN - Wireless interface can provide WAN connectivity
- LAN Ports (Switch)
- Performance
- Firewall: Up to 400Mb/s max
- IPSec VPN: Up to 50Mb/s max
- ADSL Compatibility
- ANSI T1.413 Issue2
- ITU-T G.992.1 G.dmt (ADSL)
- ITU-T G.992.2 G.lite
- ITU-T G.992.3 ADSL2
- ITU-T G.992.5 ADSL2+
- Annex L (READSL)
- Annex A
- Annex M
- ANFP Issue 3 Compliant/Certified (for Annex A & Annex M)
- DSL Forum : TR-048/67 & TR-100
- VDSL Compatibility
- BT Infinity Option 1 & Option 2 Compatible
- BT SIN 498 MCT Approved
- Support for G.INP & Vectoring
- ITU-T VDSL2 G.993.2
- ITU-T G.993.1, G.997.1
- Band Plan: G.998, G.997
- Annex A, Annex B, Annex C
- VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
- OLR, UPBO, DPBO Supported
- US0 Supported
- Loop Diagnostic Mode
- DSL Forum WT-114
- Load Balance/Failover Features
- Outbound Policy-Based Load-Balance to direct traffic via:
- NAT or Routing
- WAN Interface
- LAN Interface
- Specific LAN Gateway
- VPN Tunnel
- IP-Based or Session-Based Load Balance modes NEW!
- WAN Connection Fail-over
- BoD (Bandwidth on Demand)
- WAN1 PPPoE/PPPoA Fallback account, used if the primary details are unable to establish a working connection NEW!
- Configurable Load-Balance pool, specify WAN interfaces to load balance
- WAN Budget
- Outbound Policy-Based Load-Balance to direct traffic via:
- Vigor 2862 ATM Protocols (DSL)
- RFC-2684/RFC-1483 Multiple Protocol over AAL5
- RFC-2516 PPP over Ethernet
- RFC-2364 PPP over AAL5
- PPPoE pass through LAN/WLAN
- PPPoE/PPPoA Relay
- Transparent bridge for MPoA
- Multiple PVC support for Triple Play Applications (up to 8 simultaneous)
- Support for RFC4638 for MTU up to 1500
- Wireless LAN Features (Vigor 2862Ln Only)
- 802.11n
- Multiple SSID : Create up to 4 virtual wireless LANs (independent or joined)
- Packet Aggregation and Channel Bonding
- Optional Higher Gain or directional aerials available - Click Here.
- Active Client list in Web Interface
- Wireless LAN Isolation (from VLAN groups and wired Ethernet interfaces)
- 64/128-bit WEP Encryption
- WPA/WPA2 Encryption
- Switchable Hidden SSID
- Restricted access list for clients (by MAC address)
- Time Scheduling (WLAN radio can be disabled at certain times of day)
- Time Scheduling for individual SSIDs
- Access Point Discovery
- WDS (Wireless Distribution system) for WLAN Bridging and Repeating
- 802.1x Radius Authentication
- Wireless VLAN
- Wireless Rate-Control
- Automatic Power Management
- 802.11e WMM (Wi-Fi Multimedia)
- Station Control, limit wireless client access time per day
- Airtime Fairness
- Band Steering
- Wireless WAN mode for WAN2, switchable with Ethernet (Wireless models only)
- WAN Protocols (Ethernet)
- DHCP Client
- Static IP
- PPPoE
- PPTP
- BPA
- Firewall & Security Features
- CSM (Content Security Management):
- URL Keyword Filtering - Whitelist or Blacklist specific sites or keywords in URLs
- Block Web sites by category (e.g. Adult, Gambling etc. Subject to subscription)
- Prevent accessing of web sites by using their direct IP address (thus URLs only)
- Blocking automatic download of Java applets and ActiveX controls
- Blocking of web site cookies
- Block http downloads of file types :
- Binary Executable : .EXE / .COM / .BAT / .SCR / .PIF
- Compressed : .ZIP / .SIT / .ARC / .CAB/. ARJ / .RAR
- Multimedia : .MOV / .MP3 / .MPEG / .MPG / .WMV / .WAV / .RAM / .RA / .RM / .AVI / .AU
- Time Schedules for enabling/disabling the restrictions
- Block popular P2P (Peer-to-Peer) file sharing programs
- Block Instant Messaging programs (e.g. IRC, Skype/Yahoo Messenger etc.)
- DNS Filter: Use DNS to enforce categorisation
- Web Portal
- Multi-NAT (32 WAN IPs per WAN1 & WAN2)
- DMZ Host
- DMZ Port (via LAN port P1, switchable)
- 40 Port Redirection rules
- 40 Open Port rules (10 port ranges per rule)
- Policy-Based Firewall
- MAC Address Filter
- SPI ( Stateful Packet Inspection ) with new FlowTrack Mechanism
- DoS / DDoS Protection
- IP Address Anti-spoofing
- E-Mail Alert and Logging via Syslog
- Bind IP to MAC Address
- User Management:
- Up to 200 Profiles
- Supports external authentication via LDAP or RADIUS
- Per User Bandwidth and Time Quota
- Schedule Control to delete or disable account automatically
- CSM (Content Security Management):
- Bandwidth Management
- Quality of Service (QoS)
- Guaranteed Bandwidth for VoIP
- Class-based Bandwidth Guarantee by User-Defined Traffic Categories
- Layer 2&3 (802.1p & TOS/DCSP)
- DiffServ Code Point Classifying
- 4-level Priority for each Direction (Inbound / Outbound)
- Bandwidth Borrowed
- App QoS: Classify traffic by Application
- Temporary (5 minute) Quick Blocking of any LAN Client
- Bandwidth Limit (Shared or individual limit)
- Smart Bandwidth Limitation (Triggered by Traffic / Session)
- Session Limit
- Quality of Service (QoS)
- Network/Router Management
- Web-Based User Interface (HTTP / HTTPS)
- CLI ( Command Line Interface ) / Telnet / SSH
- Web Console: Access CLI through Web Interface
- Administration Access Control
- Brute Force Protection
- Configuration Backup / Restore
- Configuration Import from Vigor 2820, Vigor 2830 & Vigor 2850
- Built-in Diagnostic Function
- Firmware Upgrade via Web Interface, TFTP, FTP
- Logging via Syslog
- Supports SmartMonitor (up to 50 IPs monitored)
- SNMP v3 Management with MIB-II
- TR-069
- TR-104
- Access Point Management: Centrally Manage up to 20 DrayTek VigorAPs
- Switch Management: Centrallly Manage up to 10 DrayTek VigorSwitches
- VPN Facilities
- Up to 32 Concurrent VPN Tunnels (incoming or outgoing)
- Tunnelling Protocols:
- PPTP
- IPSec
- L2TP
- L2TP over IPSec
- DrayTek SSL
- GRE
- IPSec Main and Agressive modes
- IKE Phase 1 DiffieHelman Groups 1,2,5 & 14
- IKE Phase 2 DiffieHelman Groups 1,2,5 & 14 (will match phase 1 selection)
- Encryption : MPPE, DES / 3DES (168bits) and Hardware-Based AES (128/192/256bits)
- Authentication : Hardware-Based MD5, SHA-1 and SHA-256 (f/w 3.8.3 and later)
- IKE Authentication : Pre-shared Key or X.509 Digital Signature
- SSL VPN for teleworkers - Up to 16 simultaneous users. Proxy or tunnel
- LAN-to-LAN & Teleworker-to-LAN connectivity
- DHCP over IPSec
- NAT-Traversal ( NAT-T )
- Dead Peer Detection (DPD)
- VPN Pass-Through
- MOTP (Mobile One Time Password) for two factor authentication (2FA)
- Virtual IP Mapping, map a remote IP subnet/range to another range to resolve IP subnet/range conflicts
- Port forwarding (Port Redirection, Open Ports) to remote clients connected via an IPsec LAN to LAN VPN NEW!
- Network Features
- Port-Based VLAN (Inclusive/Exclusive Groups)
- 802.1q VLAN Tagging
- Port Mirroring
- 802.1X Port Authentication
- Multi Subnet DHCP Servers with DHCP Relay
- LAN Clients : Up to 1022 per subnet (for subnets 1-3)
- Custom DHCP Option support
- Dynamic DNS
- DNSSEC support
- DNS Transparent Proxy
- DNS Caching
- LAN DNS (supports CNAME)
- NTP Client (Synchronise Router Time)
- Call Scheduling (Enable/Trigger Internet Access by Time)
- RADIUS Client
- LDAP Client
- TACACS+ Client
- High Availability
- Internal RADIUS Server
- Microsoft™ UPnP Support
- Maximum MTU 1534
- Routing Protocols:
- Static Routing (30 routes)
- RIP V2
- RIPng for IPv6
- Operating Requirements
- Rack Mountable (Optional Vigor RM1 mounting bracket required)
- Wall Mountable
- Temperature Operating : 0°C ~ 45°C
- Storage : -25°C ~ 70°C
- Humidity 10% ~ 90% (non-condensing)
- Power Consumption: 18 Watt Max.
- Dimensions: L240.96 * W165.07 * H43.96 ( mm )
- Operating Power: DC 12V (via external PSU, supplied)
- Warranty : Two (2) Years RTB
- Power Requirements : 220-240VAC
لم يتم العثور على أي تقييمات