MikroTik Cloud Core Router CCR1009-7G-1C-1S+ w/ Dual Power Supplies
CCR1009-7G-1C-1S+The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.
Important changes
No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.
Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.
100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.
|
Product specifications
Details | |
---|---|
Product code |
CCR1009-7G-1C-1S+ |
CPU nominal frequency |
1.2 GHz |
CPU core count |
9 |
Size of RAM |
2 GB |
10/100/1000 Ethernet ports |
7 |
Number of USB ports |
1 |
Power Jack |
3 |
Supported input voltage |
15 V - 57 V |
PoE in |
Yes |
Voltage Monitor |
Yes |
PCB temperature monitor |
Yes |
CPU temperature monitor |
Yes |
Dimensions |
444x175x47mm |
Operating System |
RouterOS |
Tested ambient temperature |
-20C .. +60C |
License level |
6 |
Current Monitor |
Yes |
CPU |
TLR4-00980CH-10CE-A3b |
Max Power consumption |
34W |
SFP+ ports |
1 |
USB Power Reset |
Yes |
USB slot type |
microUSB type AB |
Serial port |
RS232 |
Storage type |
NAND |
Storage size |
128 MB |
CPU Threads count |
9 |
- 1.2 GHz
- 7
- 15 V - 57 V
- microUSB type AB
- 2 GB
- 444x175x47mm
No reviews found