WHY WAVE I4 ?​

Replace one of the switches in your room and

control any other installed Z-Wave device!

Wave i4 allows you to manually activate or deactivate any created scene, run synchronized actions, or execute complex

trigger scenarios. You can use it to control other Z-Wave devices within your network with one push of a button.

Due to its retrofit design, it is small enough to fit behind every wall switch. Wave i4 can show the status and control the

action of four inputs, offering maximum convenience by enabling manual control of your smart home to all family members.​

introduction to z-wave

Shelly Qubino works on Z-Wave

By using Z-Wave, smart home products can seamlessly communicate with each other, regardless of their brand or platform,

thanks to a centralized smart hub! Shelly Qubino devices work on the latest Z-Wave chip generation (S800),

one of the most popular standardized technologies for smart homes in the world.

introduction to z-wave

Works with any Z-Wave gateway

Wave i4 is retrofit and designed to fit behind switches/push-buttons. Once installed, include the device in your Z-Wave

 network (Z-Wave gateway is required) and control it using your smartphone or tablet. Shelly Qubino

 devices work with over 4000 Z-Wave certified devices and gateways. ​

 Functionalities

 Endless use applications

use cases

Multi-actions support

With a simple push of a button, you can activate up to 12 scenes or actions from other Z-Wave

devices in your network. Wave i4 supports up to 3 different automation actions per button,

which makes it extremely convenient for quick manual control over a group of devices.​

Install Wave i4 where it is the most convenient for you and set buttons to simultaneously control lights,

 blinds, and other devices in specific rooms or entire building. ​

​​Scene Activation:​

1 click​

Turn off multimedia appliances​

2 clicks

​ Close blinds​

1 long click (hold)​

Turn on/off lights in the hall​

Trigger up to 8 actions

without a gateway!

Wave i4 allows you to establish direct communication between your Z-Wave

devices and set various associations without requiring a hub!*

By supporting 2 associations per button, Wave i4 enables you to trigger and execute up to

 8 actions and thus seamlessly control multiple Z-Wave devices with a simple press of a button. ​

 ​Examples:​

1 click (for basic commands)​

Turn on/off lights ​

1 long click (hold) (for multilevel commands)​

 Dim lights or open/close blinds​

 ​*Gateway/hub is needed for a configuration of the device.​