CISCO 1941W/2 GE2EHWIC SLOTS 256MB
ضمان الوكيل .
SMS تنبيهات .
استبدال واسترجاع .
طرق دفع مختلفة .
أفضل الأسعار .
CISCO1941/K9 Overview
The Cisco 1941 Router, modular router, is designed for branch offices.
Quick Specs
Figure 1 shows the front view of Cisco Router 1941/K9.
Table 1 shows the Quick Specs of the CISCO1941/K9.
|
Product Code |
CISCO 1941/K9 |
|
Rack Units |
2 RU |
|
Interfaces |
2 integrated 10/100/1000 Ethernet ports: GE0/0&GE0/1 |
|
Expansion Slot(s) |
2 enhanced High-Speed WAN Interface Card slots 1 Internal Services Module slot |
|
RAM |
512 MB (installed) / 2 GB (max) |
|
Flash Memory |
256 MB (installed) / 8 GB (max) |
|
Dimensions |
34.3 cm x 29.2 cm x 8.9 cm |
|
Package Weight |
10.48 Kg |
Product Details
Figure 2 shows the statue LEDs, on the front panel of the 1941/K9, including three statues: SYS, ACT and PoE.
Table 2 shows the front panel LEDs area description.
|
LED |
Color |
Description |
|
SYS |
Solid green |
Solid green indicates normal operation. |
|
Blinking green |
System is booting or is in ROM monitor mode. |
|
|
Amber |
System error. |
|
|
Off |
Power is off or system board is faulty. |
|
|
ACT |
Green |
Solid or blinking when any packets are transmitted or received on any WAN or LAN, or when monitoring system activity. |
|
PoE |
Green |
PoE is available. |
|
Amber |
Power supply is not supplying PoE power. |
Figure 3 shows the back panel of this router with LEDs.
Note:
|
① |
Kensington security slot |
⑤ |
EN (Enable USB console) |
|
② |
CF 1 |
⑥ |
EN (Enable RJ-45 console) |
|
③ |
CF 0 |
⑦ |
S (Speed) |
|
④ |
ISM or WLAN |
⑧ |
L (Link) |
Table 3 shows the back panel LEDs area description.
|
LED |
Color |
Description |
Location |
|
CF 1 |
Green |
Flash memory is busy. |
Back Panel |
|
Amber |
Initialized with error. |
||
|
Blinking Green then turns off |
CompactFlash is ready for removal. |
||
|
CF 0 |
Green |
Flash memory is busy. |
Back Panel |
|
Amber |
Initialized with error. |
||
|
Blinking Green then turns off |
CompactFlash is ready for removal. |
||
|
S (Speed) |
1 blink + pause |
GE port operating at 10 Mb/s. |
Back Panel |
|
2 blink + pause |
GE port operating at 100 Mb/s. |
||
|
3 blink + pause |
GE port operating at 1000 Mb/s. |
||
|
L (Link) |
Green |
GE link is established. |
Back Panel |
|
Off |
No GE link is established. |
||
|
EN (RJ-45 console port) |
Green |
The RJ-45 console port is active. |
Back Panel |
|
EN (USB serial console port) |
Green |
The USB console port is active. |
Back Panel |
Figure 4 shows the ports and slots on the back panel of Cisco 1941/K9.
Note:
|
① |
On/Off switch |
⑦ |
Compact flash 2 |
|
② |
HWIC slot 1 |
⑧ |
HWIC slot 2 |
|
③ |
Input power connector |
⑨ |
USB serial port |
|
④ |
AUX port |
⑩ |
GE 0/1 |
|
⑤ |
GE 0/0 |
⑪ |
USB ports |
|
⑥ |
Compact flash 1 |
||
·Cisco 1941/K9 supports 2 integrated EHWIC slots for flexible configurations. It supports two modules: 1 double wide HWIC-D or single wide EHWIC/HWIC module or a 2nd single wide E-HIC/HWIC module.
·2 high-speed USB 2.0 ports enable another mechanism secure token capabilities and storage.
·The 1941 has 2 external Compact Flash slots supporting to extend up to 8GB.
Figure 5 shows the internal view of the Cisco 1941.
There is a blank Memory slot inside the device, supporting to extend memory.
- 2 integrated 10/100/1000 Ethernet ports: GE0/0&GE0/1
- 512 MB (installed) / 2 GB (max)
- 1 Internal Services Module slot ,
- 2 enhanced High-Speed WAN Interface Card slots
- 34.3 cm x 29.2 cm x 8.9 cm
لم يتم العثور على أي تقييمات
