TEG-40128-12-Port 10G Web Smart Switch with 8 x 10GBASE-T ports including 2 x 10G SFP+ slots and 2 x shared 10GBASE-T / 10G SFP+ slots
Web Smart Management
management for reduced switch configuration complexity and offers a combination of more commonly used SMB management features for easy deployment. |
Integration Flexibility
control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap and syslog for monitoring and flexible network integration. |
High-Speed 10GBASE-T and 10G SFP+
and two 10GBASE-T / 10G SFP+ shared ports for high-speed network uplinks or downlink NAS / access server connections providing a cost-effective solution in adding 10G link capability to an SMB network. |
Hardware Provides 8 x 10GBASE-T ports, 2 x 10G SFP+ slots, and 2 x 10GBASE-T / 10G SFP+ shared ports for high-speed network uplinks or downlink server connections, and 1U rack mountable. |
|
Smart Fans Smart fans saves energy by auto-adjusting the fan speed and use based on cooling needs. |
|
IPv6 Ready This switch supports IPv6 configuration and IPv6 neighbor discovery. |
|
Traffic Management A broad range of network configurations are supported by: 802.3ad link aggregation, asymmetric VLAN, 802.1Q VLAN, Voice VLAN, Private VLAN, bandwidth controls, GVRP, IGMP, 802.1p class of service (CoS), spanning tree (STP, RSTP, and MSTP), and QoS queue scheduling. |
|
Troubleshooting Real time traffic comparison charts, error group charts, and a convenient cable diagnostic test aid in rapid troubleshooting. |
|
Access Controls Features such as ACL, SSL, MAC / port filtering, Denial of Service controls, 802.1X, TACACS+, and RADIUS are compatible with layered network access controls. |
|
Monitoring RMON, SNMP, SNMP Trap, and Port Mirroring support administrator monitoring solutions. |
- Standards
- IEEE 802.1d
- IEEE 802.1p
- IEEE 802.1Q
- IEEE 802.1s
- IEEE 802.1w
- IEEE 802.1X
- IEEE 802.1ab
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3z
- IEEE 802.3ae
- IEEE 802.3ab
- IEEE 802.3ad
- IEEE 802.3an
- IEEE 802.3az
- Device Interface
- 8 x 10GBASE-T ports
- 2 x 10G SFP+ slots
- 2 x 10GBASE-T ports / 10G SFP+ shared slots
- LED indicators
- Data Transfer Rate
- Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
- Gigabit Ethernet: 2000 Mbps (full duplex)
- 10 Gigabit Ethernet: 20 Gbps (full duplex)
- Performance
- Switch fabric: 240 Gbps
- RAM buffer: 2 MB
- MAC Address Table: 16K entries
- Jumbo Frames: 10 KB
- HOL Blocking Prevention
- Forwarding rate: 178.6 Mpps (64-byte packet size)
- Management
- Dual Image Configuration
- HTTP / HTTPS (SSL v2 / 3 TLS) Web based GUI
- SNMP v1, v2c, v3
- RMON v1
- Static Unicast MAC Address
- Enable / disable 802.3az Power Saving
- LLDP
- Virtual Cable Test
- IPv6: IPv6 Neighbor Discovery, IPv6 Static IP, DHCPv6, Auto configuration
- MIB
- MIB II RFC 1213
- Bridge MIB RFC 1493
- Bridge MIB Extension RFC 2674
- SNMPv2 MIB RFC 1907
- Ethernet Interface MIB RFC 1643
- Ethernet –like MIB RFC 2863
- Interface Group MIB RFC 2233
- MIB Traps Convention RFC 1215
- RMON MIB RFC 1757, RFC 2819
- 802.1p MIB RFC 2674
- RADIUS Client Authentication MIB RFC 2618
- LLDP-MIB IEEE 802.1ab
- Ping MIB RFC 2925, RFC 4560
- Spanning Tree
- IEEE 802.1D STP (Spanning Tree protocol)
- IEEE 802.1w RSTP (Rapid Spanning Tree protocol)
- IEEE 802.1s MSTP (Multiple Spanning Tree protocol)
- Link Aggregation
- Static Link Aggregation
- 802.3ad Dynamic LACP
- Quality of Service (QoS)
- 802.1p Class of Service (CoS)
- DSCP (Differentiated Services Code Point)
- Bandwidth Control per port
- Queue Scheduling: Strict Priority, Weighted Round Robin (WRR)
- VLAN
- Multiple management VLAN assignment
- Asymmetric VLAN
- 802.1Q Tagged VLAN
- Dynamic GVRP
- Up to 256 VLAN groups, ID Range 1-4094
- Private VLAN (Protected Ports)
- Voice VLAN (10 user defined OUIs)
- Multicast
- IGMP Snooping v1, v2, v3 (per VLAN)
- Static Multicast Address
- Up to 256 multicast entries
- Port Mirror
- RX, TX, or Both
- One to one
- Many to one
- Access Control
- 802.1X Port-Based Network Access Control, RADIUS, TACACS+
- Local Dial In User Authentication
- DHCP Snooping (per VLAN)
- Loopback Detection
- Duplicated Address Detection
- Trusted Host
- Denial of Service (DoS)
- ACL IPv4 L2-L4 & IPv6
- MAC Address
- VLAN ID
- Ether Type (IPv4 only)
- IP Protocol 0-255
- TCP / UDP Port 1-65535
- 802.1p
- DSCP (IPv4 only)
- IPv6 Address (IPv6 only)
- Compatibility
- Optional Software Utility: Windows® 10, 8.1, 8, 7, Vista, XP, Windows® 2003 / 2008 Server
- Special Features
- High speed 10GBASE-T & 10G SFP+
- IPv6
- Rack mountable
- Power
- Input: 100 - 240 V AC, 50/60 Hz, internal power supply
- Consumption: 90.81 Watts (max.)
- Fan / Acoustics
- Quantity: 2
- Noise Level: 53 dB(A) (max.)
- MTBF
- 217,863 hours
- Operating Temperature
- 0 – 50 °C (32 - 122 °F)
- Operating Humidity
- Max. 90% non-condensing
- Dimensions
- 440 x 210 x 44.45 mm (17.3 x 8.27 x 1.75 in.)
- Rack mountable 1U height
- Weight
- 3.18 kg (7.01 lbs.)
- Certifications
- CE
- FCC
- UL
Package Contents
- TEG-40128
- Quick Installation Guide
- CD-ROM (Utility & User’s Guide)
- Power cord (1.8 m / 6 ft.)
- Rack mount kit
- 2 x 10G SFP+ slots ,
- 2 x 10GBASE-T ports / 10G SFP+ shared slots ,
- 8 x 10GBASE-T ports ,
- LED indicators
- 100 - 240 V AC, 50/60 Hz, internal power supply
- 12
- 440 x 210 x 44.45 mm (17.3 x 8.27 x 1.75 in.) ,
- Rack mountable 1U height
- 3.18 kg (7.01 lbs.)
- 90.81 Watts (max.)
- 0 – 50 °C (32 - 122 °F)
لم يتم العثور على أي تقييمات