TI-G80-8-Port Hardened Industrial Gigabit DIN-Rail Switch
Network Ports 8 x Gigabit Ethernet ports |
|
DIN-Rail/Wall Mounts IP30 rated metal enclosure with included DIN-rail and wall mount hardware |
|
Switching Capacity 16 Gbps switching capacity |
|
Redundant Power Dual redundant power inputs with overload current protection (power supply sold separately: model TI-M6024) |
|
Alarm Output Alarm output triggered by power failure of primary and/or redundant power |
|
Extreme Temperatures Hardened switch is rated for an operating temperature range of -40 to 75 ºC (-40 to 167 ºF) |
|
Electro Magnetic Compliance Complies with FCC Part 15 Subpart B Class A and CE EN 55022 Class A standards |
|
Certifications Rated for information technology (ITE) equipment (EN55022/24) |
|
Shock and Vibration Resistant Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6) |
|
Grounding Point Grounding point protects equipment from external electrical surges |
- Standards
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3ab
- IEEE 802.3x
- Device Interface
- 8 x Gigabit ports
- 6-pin removable terminal block
- LED indicators
- DIN-Rail mount
- Wall mount
- Grounding point
- Data Transfer Rate
- Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
- Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
- Gigabit: 2000 Mbps (full duplex)
- Performance
- Data RAM Buffer: 1024 KB
- Switching Fabric: 16 Gbps
- MAC Address Table: 8 K entries
- Forwarding rate: 11.9 Mpps (64-byte packet size)
- Special Features
- Hardened components rated for extreme temperatures
- Dual redundant power inputs
- Auto-Negotiation
- Auto store and forward architecture
- Automatic address learning and address aging
- ESD 8 KV and Surge 6 KV protection
- Power
- Input: 12 - 56 V DC
- Compatible power supply: TI-M6024 (sold separately)
- Consumption: Max. 5 Watts
- Terminal Block
- Redundant power inputs, alarm relay contact, 6 pin
- Wire range: 0.34 mm^2 to 2.5 mm^2
- Solid wire (AWG): 12-24/14-22
- Stranded wire (AWG): 12-24/14-22
- Torque: 5 lb. – In / 0.5 Nm / 0.56 Nm
- Wire strip length: 7-8 mm
- Alarm Relay Contact
- Relay outputs with current carrying capacity of 1 A, 24 V DC
- Open circuit mode when two power sources are connected
- Short circuit mode when only one power source is connected
- MTBF
- 510,304 hours
- Housing
- IP30 metal case
- DIN-rail mount
- Wall mount
- Grounding point
- 8 KV ESD protection
- 6 KV surge protection
- Operating Temperature
- - 40 to 75 °C (-40 to 167 °F)
- Operating Humidity
- Max. 95 % non-condensing
- Dimensions
- 143 x 104 x 36 mm (5.6 x 4.1 x 1.4 in.)
- Weight
- 512 g (1.1 lb)
- Certifications
- CE
- FCC
- Shock (IEC 60068-2-27)
- Freefall (IEC 60068-2-32)
- Vibration (IEC 60068-2-6)
Package Contents
- TI-G80
- Quick Installation Guide
- Removable terminal block
- DIN-rail / wall mount kit
- 6-pin removable terminal block ,
- 8 x Gigabit ports ,
- DIN-Rail mount ,
- Grounding point ,
- LED indicators ,
- Wall mount
- 12 - 56 V DC
- 8
- 143 x 104 x 36 mm (5.6 x 4.1 x 1.4 in.)
- 512 g (1.1 lb)
- Max. 5 Watts
- - 40 to 75 °C (-40 to 167 °F) ,
- Max. 5 Watts
لم يتم العثور على أي تقييمات