TI-PG62B-6-Port Industrial Gigabit PoE+ DIN-Rail Switch 12 – 56 V
PoE Power
supplies up to four Power over Ethernet devices. |
Fault Tolerance
power inputs with output alarm relay. |
Industrial Hardened Design
housing designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate within a wide temperature range of -40 – 75° C (-40 – 167° F). |
Network Ports 4 x Gigabit PoE+ ports and 2 x dedicated SFP slots |
|
DIN-Rail / Wall Mounts IP30 rated metal enclosure with included DIN-rail and wall mount hardware |
|
Switching Capacity 12 Gbps switching capacity |
|
Redundant Power Dual redundant power inputs with overload current protection (power supply sold separately models: (model: TI-S12048) |
|
Alarm Relay Alarm relay triggered by power failure of primary and/or redundant power |
|
Jumbo Frame Sends larger packets, or Jumbo Frames (up to 9 KB), for increased performance |
|
Extreme Temperatures Industrial switch is rated for an operating temperature range of -40 – 75 °C (-40 – 167 °F) |
|
Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) |
|
Grounding Point Grounding point protects equipment from external electrical surges |
- Standards
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3ab
- IEEE 802.3z
- IEEE 802.3x
- IEEE 802.3af
- IEEE 802.3at
- Device Interface
- 4 x Gigabit PoE+ ports
- 2 x 100/1000 Mbps SFP slots
- 6-pin removable terminal block
- LED indicators
- DIP switch
- DIN-Rail mount
- Wall mount
- Grounding point
- Data Transfer Rate
- Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
- Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
- Gigabit: 2000 Mbps (full duplex)
- Performance
- Data RAM Buffer: 1024 KB
- Switching Fabric: 12 Gbps
- MAC Address Table: 1 K entries
- Jumbo Frame: 9 KB
- Forwarding rate: 8.9 Mpps (64-byte packet size)
- Special Features
- Hardened components rated for extreme temperatures
- Supports 12/24/48 power inputs
- Voltage booster boost up to 55V DC
- Dual redundant power inputs
- Auto-Negotiation
- Auto store and forward architecture
- Automatic address learning and address aging
- ESD 6KV support
- DC Power
- Input: 12/24/48 V DC
- Output: up to 55 V DC
- Compatible power supply: TI-S12048 (sold separately)
- Consumption: Max. 5.76 Watts (no PoE)
- PoE
- PoE budget: 120 W @ 24 VDC / 48 VDC / 56 VDC
- PoE budget: 60 W @ 12 VDC
- Terminal Block
- Redundant power inputs, alarm relay contact, 6 pin
- Wire range: 0.34 mm^2 to 2.5 mm^2
- Solid wire (AWG): 12-24/14-22
- Stranded wire (AWG): 12-24/14-22
- Torque: 5 lb. – In / 0.5 Nm / 0.56 Nm
- Wire strip length: 7-8 mm
- DIP Switch
- 1: OFF (port 5 SFP on, default), ON (port 5 SFP off)
- 2: OFF (SFP 1000 M, default), ON (SFP 100 M)
- Alarm Relay Contact
- Relay outputs with current carrying capacity of 1A, 24V DC
- Open circuit mode when one power source is connected
- Short circuit mode when two power sources are connected
- MTBF
- 510,304 hours
- Housing
- IP30 metal case
- DIN-rail mount
- Wall mount
- Grounding point
- 6 KV ESD protection
- Operating Temperature
- - 40 to 75 °C (-40 to 167 °F)
- Operating Humidity
- Max. 95 % non-condensing
- Dimensions
- 143 x 105 x 45 mm (5.6 x 4.1 x 1.8 in.)
- Weight
- 700 g (1.6 lb)
- Certifications
- CE
- FCC
- Shock (EN 60068-2-27)
- Freefall (EN 60068-2-32)
- Vibration (EN 60068-2-6)
Package Contents
- TI-PG62B
- Quick Installation Guide
- Removable terminal block
- DIN-rail and wall mount kit
- 2 x 100/1000 Mbps SFP slots ,
- 4 x Gigabit PoE+ ports ,
- 6-pin removable terminal block ,
- Adjustable output power DIP switch (5 V, 7.5 V, 9 V, 12 V) ,
- DIN-Rail mount ,
- Grounding point ,
- LED indicators ,
- Wall mount
- up to 55 V DC
- 12/24/48 V DC
- 6
- 143 x 105 x 45 mm (5.6 x 4.1 x 1.8 in.)
- 700 g (1.6 lb)
- Max. 5.76 Watts no PoE
- - 40 to 75 °C (-40 to 167 °F)
لم يتم العثور على أي تقييمات