TRENDnet 10-Port Industrial Gigabit PoE+ DIN-Rail Switch

TI-PG102 (Version v1.0R)

• 8 x Gigabit PoE+ ports
• 2 x Gigabit RJ-45 / SFP shared ports
• 240 W PoE power budget
• 20 Gbps switching capacity
• Hardened IP30 rated metal switch
• Includes DIN-rail and wall mounts
• Operating temperature range of -40° – 75°C (-40° – 167°F)
• Dual redundant power inputs with overload current protection
• Alarm output triggered by power failure
• Power supply sold separately (models: TI-S24048 / 48VDC3000)
• TRENDnet’s 10-Port Industrial Gigabit PoE+ DIN-Rail Switch, model TI-PG102, has eight gigabit PoE+ ports with a 240 W PoE power budget, plus two gigabit RJ-45 / SFP shared ports. Users are able to connect eight PoE+ devices to the switch, while still providing two gigabit ports for additional network connections. The switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75°C (-40° – 167°F) for industrial environments.
  PoE Power 
  A 240 W PoE+ power budget supplies up to eight Power over Ethernet devices with PoE+ power. Fault Tolerance 
  Features dual redundant power inputs with output alarm relay. Industrial Hardened Design 
  Equipped with a rugged IP30 rated housing, designed to withstand a high degree of vibration, shock, and operate within a wide temperature range of -40 – 75°C (-40 – 167°F).  
  Full PoE+ Power Budget 
  Supplies up to 30 W of PoE / PoE+ power per port with a 240 W PoE power budget Network Ports 
  8 Gigabit PoE+ ports plus 2 Gigabit RJ-45 / SFP shared ports DIN-Rail / Wall Mounts 
  IP30 rated metal enclosure with included DIN-rail and wall mount hardware Switching Capacity 
  20 Gbps switching capacity Redundant Power 
  Dual redundant power inputs with overload current protection (power supply sold separately models: TI-S24048 / 48VDC3000) Alarm Relay 
  Alarm relay triggered by power failure of primary and / or redundant power Jumbo Frame 
  Sends larger packets, or Jumbo Frames (up to 10 KB), for increased performance Extreme Temperatures 
  Industrial switch is rated for an operating temperature range of -40 – 75°C (-40 – 167°F) Shock and Vibration Resistant 
  Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point 
  Grounding point protects equipment from external electrical surges
• Standards
  
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.3ab
  • IEEE 802.3z
  • IEEE 802.3x
  • IEEE 802.3af
  • IEEE 802.3at
  Device Interface
  • 8 x Gigabit PoE+ ports
  • 2 x Gigabit Ethernet ports
  • 2 x Shared SFP slots
  • 6-pin removable terminal block
  • LED indicators
  • DIN-Rail mount
  • Wall mount
  • Grounding point
  Data Transfer Rate
  • Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
  • Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
  • Gigabit: 2000 Mbps (full duplex)
  Performance
  • Data RAM Buffer: 2048 KB
  • Switching Fabric: 20 Gbps
  • MAC Address Table: 16 K entries
  • Forwarding rate: 14.8 Mpps (64-byte packet size)
  • Hardened components rated for extreme temperatures
  • Dual redundant power inputs
  • Auto-Negotiation
  • Auto store and forward architecture
  • Automatic address learning and address aging
  • ESD 6 KV protection
  Power
  • Input: 48 - 56 V DC
  • Compatible power supply: TI-S24048 (sold separately)
  • Consumption: 5.67 W max. (without PD)
  PoE
  • Per port up to 30 W
  • PoE budget: 240 Watts
  Terminal Block
  • Redundant power inputs, alarm relay contact, 6 pin
  • Wire range: 0.34 mm^2 to 2.5 mm^2
  • Solid wire (AWG): 12-24 / 14-22
  • Stranded wire (AWG): 12-24 / 14-22
  • Torque: 5 lb. – In / 0.5 Nm / 0.56 Nm
  • Wire strip length: 7-8 mm
  Alarm Relay Contact
  • Relay outputs with current carrying capacity of 1 A, 24 V DC
  • Open circuit mode when two power sources are connected
  • Short circuit mode when only one power source is connected
  • 510,400 hours
  Housing
  • IP30 metal case
  • DIN-rail mount
  • Wall mount
  • Grounding point
  • ESD 6 KV protection
  Operating Temperature
  • - 40 to 75 °C (-40 to 167 °F)
  Operating Humidity
  • Max. 95 % non-condensing
  Dimensions
  • 155 x 120 x 48 mm (6.1 x 4.7 x 1.9 in.)
  Weight
  • 445 g (1 lb)
  Certifications
  • CE
  • FCC
  • Shock (EN 60068-2-27)
  • Freefall (EN 60068-2-32)
  • Vibration (EN 60068-2-6)
  Warranty
  • 3 year limited
  PACKAGE CONTENTS
  • TI-PG102
  • Quick Installation Guide
  • Removable terminal block
  • DIN-rail and wall mount kit