TrendNet TI-PG62 6-Port Hardened Industrial Gigabit PoE+ DIN-Rail Switch
ضمان الوكيل .
SMS تنبيهات .
استبدال واسترجاع .
طرق دفع مختلفة .
أفضل الأسعار .
TRENDnet’s TI-PG62 is a reliable IP30 unmanaged DIN-rail PoE+ switch with a rugged housing rated for extreme industrial environments. It offers 4 Gigabit PoE+ ports, one shared Gigabit port (RJ-45 / SFP), one dedicated SFP slot, and a 12 Gbps switching capacity. Dual redundant power inputs and a power failure alarm relay.
 |
 |
 |
|
PoE Power to four Power over Ethernet devices with PoE+ power. |
Fault Tolerance (Primary and RPS) from external power sources and an output alarm relay to indicate the event of input power failure. |
Industrial Hardened Design designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments. |
_1.jpg)
 |
Network Ports 4 x Gigabit PoE+ ports, 1 x shared Gigabit port (RJ-45 / SFP) and 1 x dedicated SFP slot |
 |
DIN-Rail / Wall Mounts IP30 rated metal enclosure with included DIN-rail and wall mount hardware |
 |
Switching Capacity 12 Gbps switching capacity |
 |
Redundant Power Dual redundant power inputs with overload current protection (power supply sold separately models: 48VDC3000 / TI-S24048 / TI-S12048) |
 |
Alarm Relay Alarm relay triggered by power failure of primary and / or redundant power |
 |
Jumbo Frame Sends larger packets, or Jumbo Frames (up to 9 KB), for increased performance |
 |
Extreme Temperatures Hardened switch is rated for an operating temperature range of -40 to 75 ºC (-40 to 167 ºF) |
 |
Electro Magnetic Compliance Complies with FCC Part 15 Subpart B Class A and CE EN 55022 Class A standards |
 |
Certifications Rated for information technology (ITE) equipment (EN55022 / 24); industrial, scientific, and medical (ISM) Equipment (EN55011) |
 |
Shock and Vibration Resistant Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6) |
 |
Grounding Point Grounding point protects equipment from external electrical surges |
- Standards
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3ab
- IEEE 802.3z
- IEEE 802.3x
- IEEE 802.3af
- IEEE 802.3at
- Device Interface
- 4 x Gigabit PoE+ ports
- 1 x Shared Gigabit port
- 1 x Shared SFP slot
- 1 x Dedicated SFP slot
- 6-pin removable terminal block
- LED indicators
- DIP switch
- DIN-Rail mount
- Wall mount
- Grounding point
- Data Transfer Rate
- Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
- Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
- Gigabit: 2000 Mbps (full duplex)
- Performance
- Data RAM Buffer: 1024 KB
- Switching Fabric: 12 Gbps
- MAC Address Table: 1 K entries
- Jumbo Frame: 9 KB
- Forwarding rate: 8.9 Mpps (64-byte packet size)
- Special Features
- Hardened components rated for extreme temperatures
- Dual redundant power inputs
- Auto-Negotiation
- Auto store and forward architecture
- Automatic address learning and address aging
- ESD 8KV support
- DC Power
- Input: 48 - 56 V DC
- Compatible power supply: TI-S12048 (sold separately)
- Consumption: Max. 5.76 Watts (no PoE)
- AC Power
- Input: 100 - 240 V AC, 50/60 Hz, 2 A
- Compatible power adapter: 48VDC3000 (sold separately)
- Output: 48V DC, 3.34 A 160 W max.
- PoE
- PoE budget: 120 Watts
- Terminal Block
- Redundant power inputs, alarm relay contact, 6 pin
- Wire range: 0.34 mm^2 to 2.5 mm^2
- Solid wire (AWG): 12-24/14-22
- Stranded wire (AWG): 12-24/14-22
- Torque: 5 lb. – In / 0.5 Nm / 0.56 Nm
- Wire strip length: 7-8 mm
- DIP Switch
- 1: OFF (port 5 SFP on, default), ON (port 5 SFP off)
- 2: OFF (SFP 1000M, default), ON (SFP 100M)
- Alarm Relay Contact
- Relay outputs with current carrying capacity of 1A, 24V DC
- Open circuit mode when two power sources are connected
- Short circuit mode when only one power source is connected
- MTBF
- 460,304 hours
- Housing
- IP30 metal case
- DIN-rail mount
- Wall mount
- Grounding point
- 8 KV ESD protection
- Operating Temperature
- - 40 to 75 °C (-40 to 167 °F)
- Operating Humidity
- Max. 95 % non-condensing
- Dimensions
- 143 x 105 x 36 mm (5.6 x 4.1 x 1.4 in.)
- Weight
- 500 g (1.1 lb)
- Certifications
- CE
- FCC
- Shock (IEC 60068-2-27)
- Freefall (IEC 60068-2-32)
- Vibration (IEC 60068-2-6)
Package Contents
- TI-PG62
- Quick Installation Guide
- Removable terminal block
- DIN-rail and wall mount kit
- 1 x Dedicated SFP slot ,
- 1 x Shared Gigabit port ,
- 1 x Shared SFP slot ,
- 4 x Gigabit PoE+ ports ,
- 6-pin removable terminal block ,
- DIN-Rail mount ,
- Grounding point ,
- LED indicators ,
- Wall mount
- 48V DC, 3.34 A 160 W max
- 100 - 240 V AC, 50/60 Hz, 2 A
- 143 x 105 x 36 mm (5.6 x 4.1 x 1.4 in.)
- 500 g (1.1 lb)
- 48VDC3000 (sold separately
- - 40 to 75 °C (-40 to 167 °F)
لم يتم العثور على أي تقييمات
