Ubiquiti FiberPoE Gen2 Optical Data Transport for Outdoor PoE Devices

اتصل بنا لمعرفة السعر
(السعر غير شامل الضريبة)
(excl, VAT)
متوفر بالمخزون
التوصيل
طرق الدفع
مميزاتنا

ضمان الوكيل .

SMS تنبيهات .

استبدال واسترجاع .

طرق دفع مختلفة .

أفضل الأسعار .

Ubiquiti FiberPoE Gen2 Optical Data Transport for Outdoor PoE Devices (F-POE-G2)

The Ubiquiti FiberPoE Gen2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device.

Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations.

The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection.

Ubiquiti FiberPoE Gen2 Key Features

  • Reliable Long-Distance Gigabit PoE Runs

  • Enhanced ESD Protection and EMI Reduction

  • Dependable 24V/50V Passive PoE Transport

Fiber-to-Ethernet Conversion
The FiberPoE provides fiber connectivity to any PoE device.

 




Designed for Outdoor Durability

The FiberPoE features an outdoor weatherproof form factor with integrated strain relief management.

 




Power Versatility
The FiberPoE allows separate power from standard Ethernet cables or standard terminal block / power cable support.

 There are three ways to configure the input and output power:



 

Separate Data and Power Transport
PoE is ideal for indoor or short-run installations. However, for outdoor, long-distance installations, PoE becomes vulnerable to EMI and is

limited to 100 meters with correlated power loss. With the FiberPoE Gen 2, data and power are transported on separate cables to greatly improve

 data integrity and enable much longer cable runs. The FiberPoE Gen 2 provides Gigabit bi-directional data transport between twisted-pair Ethernet cable

 and fibre optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE Gen 2 device as a Fiber‐to‐Ethernet

Converter, or a pair of FiberPoE Gen 2 devices to create a Fiber Bridge.

Enhanced Surge Protection
Featuring a built-in high-current Gas Discharge Tube (GDT) for the DC terminal block and PoE port, the FiberPoE Gen 2 delivers enhanced surge protection.

The added GDT support effectively protects against lightning and other power surges.

Fiber Optic Data Transport
Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI).

Data integrity is also sustained in runs beyond 100 meters, the limit of Ethernet over twisted-pair cable. The FiberPoE Gen 2 supports

 a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.

الشركة المصنعة
Ubiquiti Networks
مواصفات المنتج العامة
الطاقة عبر الايثرنت PoE
  • PoE RJ45 port, 24V DC, 2-pair (4, 5+; 7, 8-), or 24V DC/50V DC 4-pair PoE
ESD/EMP Protection
± 24kV Contact / Air for Ethernet
Ports
  • (1) 1 Gbps SFP Port ,
  • (1) DC RJ45 port DC injection ,
  • (1) DC terminal block ,
  • (1) GbE PoE port*
Material
Polycarbonate
Dimension
  • 196.4x 93.5 x 32.4 mm ( 7.7 x 3.7 x 1.3")
استهلاك الطاقة الأقصى
  • 1.5W

لم يتم العثور على أي تقييمات

خصومات / الأكثر مبيعاً

  • الأكثر مبيعاً
  • الخصومات
  • شوهد مؤخرا
 
التوصيل السريع والآمن

التوصيل داخل المملكة ودول الخليج

ضمان الخدمة والجودة

جميع منتجاتنا أصلية ذات جودة عالية

الاسترجاع خلال 7 أيام

لديك 7 أيام لاسترجاع المنتج