Ubiquiti FiberPoE Gen2 Optical Data Transport for Outdoor PoE Devices
Ubiquiti FiberPoE Gen2 Optical Data Transport for Outdoor PoE Devices (F-POE-G2)
The Ubiquiti FiberPoE Gen2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device.
Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations.
The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection.
Ubiquiti FiberPoE Gen2 Key Features
-
Reliable Long-Distance Gigabit PoE Runs
-
Enhanced ESD Protection and EMI Reduction
-
Dependable 24V/50V Passive PoE Transport
Fiber-to-Ethernet
Conversion
The FiberPoE provides fiber connectivity
to any PoE device.
Designed for Outdoor Durability
The FiberPoE features an outdoor weatherproof form factor with integrated strain
relief management.
Power Versatility
The FiberPoE allows separate power from standard Ethernet cables or standard
terminal block / power cable support.
There are three ways to configure the input and output power:
Separate Data and
Power Transport
PoE is ideal for indoor or short-run installations. However, for outdoor,
long-distance installations, PoE becomes vulnerable to EMI and is
limited to 100 meters with correlated power loss. With the FiberPoE Gen 2, data and power are transported on separate cables to greatly improve
data integrity and enable much longer cable runs. The FiberPoE Gen 2 provides Gigabit bi-directional data transport between twisted-pair Ethernet cable
and fibre optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE Gen 2 device as a Fiber‐to‐Ethernet
Converter, or a pair of FiberPoE Gen 2 devices to create a Fiber Bridge.
Enhanced Surge
Protection
Featuring a built-in high-current Gas Discharge Tube (GDT) for the DC terminal
block and PoE port, the FiberPoE Gen 2 delivers enhanced surge protection.
The added GDT support effectively protects against lightning and other power surges.
Fiber Optic Data
Transport
Using fiber optic cable for data transport significantly reduces electrostatic
discharge (ESD) failures and electromagnetic interference (EMI).
Data integrity is also sustained in runs beyond 100 meters, the limit of Ethernet over twisted-pair cable. The FiberPoE Gen 2 supports
a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.
- PoE RJ45 port, 24V DC, 2-pair (4, 5+; 7, 8-), or 24V DC/50V DC 4-pair PoE
- (1) 1 Gbps SFP Port ,
- (1) DC RJ45 port DC injection ,
- (1) DC terminal block ,
- (1) GbE PoE port*
- 196.4x 93.5 x 32.4 mm ( 7.7 x 3.7 x 1.3")
- 1.5W
No reviews found