Access Point CISCO (WAP150-E- Wireless AC900 Gigabit with PoE
Features
- The concurrent dual-band radio supports up to 1.2 Gbps for increase capacity and coverage
- Single Point Setup, a controller-less technology, simplifies the deployment and management of multiple access points, without requiring additional hardware
- The Gigabit Ethernet LAN interface can enable a high-speed uplink to the wired network
- Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, helps protect sensitive business information
- A captive portal support supports highly secure, customized guest access with multiple rights and roles
- Simple installation and an intuitive web-based configuration and wizard can enable fast, simple deployment and setup in minutes
- Support for PoE powered device (PD) can enable easy installation without expensive additional wiring
- Sleek design with multiple internal antennas
- Versatile mounting can enable installation on a ceiling, wall, or desktop
- Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance
- Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network
- Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades
- Limited lifetime hardware warranty provides peace of mind
Access Point CISCO (WAP150-E-K9-EU) Wireless AC900 Gigabit with PoE
| Brand | CISCO |
| Model | WAP150-E-K9-EU |
| Standards and Protocol | IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460) |
| Antenna | Internal antennas optimized for installation on a wall Internal Fixed Planar inverted-F antenna (PIFA) |
| Wireless Range | ระยะทางรับ-ส่งสูงสุด ที่โล่งไม่มีสิ่งกีดขวางประมาณ 50-100 เมตร |
| Frequency Range | Dual concurrent radios (2.4 and 5 GHz) |
| Wireless Transmit Power | Maximum antenna gain of 3.61 dBi on 2.4 GHz Maximum antenna gain of 3.85 dBi on 5 GHz |
| Memory | 256 MB RAM 128 MB flash |
| LED Indicators | 1 x Multifunction LED |
| Interface | 1 x LAN Gigabit Ethernet auto-sensing, with support for 802.3af /at PoE, power port for AC adapter (included) |
| Button | Reset button, power on/off push button |
| Data Rates | 802.11a/b/g : 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps 802.11n : 6.5 to 300 Mbps 802.11ac : 6.5 to 867 Mbps |
| Wireless Security | WPA, WPA2 : including Enterprise authentication Access control : Management access control list (ACL) plus MAC ACL Secure management : HTTPS SSID broadcast Rogue access point detection |
| Wireless Features | 802.11n/ac 2x2 multiple-input multiple-output (MIMO) with 2 spatial streams at 5 GHz 2x2 MIMO with 2 spatial streams at 2.4 GHz 20-, 40-, and 80-Mhz channels for 802.11ac 20- and 40-Mhz for 802.11n PHY data rate up to 1.2 Gbps 802.11 dynamic frequency selection (DFS) |
| PoE | support for 802.3af /at PoE, power port for AC adapter (included) IEEE 802.3af Ethernet switch Cisco Power Injector : SB-PWR-INJ2-xx AC adapter : SB-PWR-12V/1.5A power adapter in a box POE power Peak power: 9.5Watts |
| Environment | Operating temperature : 0° to 40°C (32° to 104°F) Storage temperature : -20° to 70°C (-4° to 158°F) Operating humidity : 10% to 85% noncondensing Storage humidity : 5% to 90% noncondensing |
| Package Contents | WAP150 Wireless-AC/N Dual Radio Access Point Power adapter 12V1.5A Quick-start guide Ethernet network cable |
| Work Mode | Access point mode, WDS Bridging, Workgroup Bridge mode |
| Management / Configuration / Tools | Multiple-Access Point Management Single Point Setup Number of access points per cluster : 4 Active clients per cluster : 120 Configuration Web user interface : Built-in web user interface for easy browser-based configuration (HTTP, HTTPS) Management Management protocols : Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour Remote management Event logging : Local, remote syslog, email alerts Network diagnostics : Logging and packet capture Web firmware upgrade : Firmware upgradable through web browser, imported or exported configuration file Dynamic Host Configuration Protocol (DHCP) : DHCP client IPv6 host HTTP redirect |
| Wall/Ceiling Mount | Multiple mounting options Desktop or Wall |
| - | Wireless throughput : Up to 1.2 Gbps data rate (real-world throughput will vary) Recommended user support : Up to 64 connective users, 10 active users per radio |
| Dimension | (W x D x H) : 13.50 x 13.50 x 3.80 cm |
| Net Weight | 0.35 KG |
لم يتم العثور على أي تقييمات
