TRENDnet N300 High Power PoE Access Point
TRENDnet’s plenum rated business class N300 High Power PoE Access Point, model TEW-735AP, greatly increases wireless coverage as compared to standard access points. A variety of installation scenarios are supported with Access Point, WDS AP, WDS Bridge, and Repeater modes. Save installation time and costs with PoE.
Installation | |
Quick Setup Get up and running in minutes with an intuitive guided setup |
|
Plenum Rated Plenum rating expands installation options |
|
Housing Off white color and smoke detector shape blends into most environments |
|
Power over Ethernet (PoE) Save installation time and costs with PoE (Optional power port for non-PoE installations) |
|
LED Control Disable diagnostic LEDs to further reduce visual attention |
|
Performance | |
Wireless Coverage High power radio greatly expands wireless coverage |
|
Wireless Speed Proven 300 Mbps wireless N |
|
Backward Compatible Compatible older wireless G devices |
|
Management | |
Operation Modes Access Point, WDS AP, WDS Bridge, and Repeater modes |
|
IPv6 IPv6 pass through support |
|
SSIDs Create up to four wireless virtual LANs (SSIDs) |
|
System Log System log aids network troubleshooting |
|
SNMP Extend network monitoring to this device with SNMP support |
|
Security | |
Encrypted Wireless Support for encryption up to WPA2 |
|
VLAN Management Up to four SSIDs with VLAN management support |
|
Network Access Create MAC filter tables to reduce network access risk |
- 4 dBi internal PIFA x 2
- IEEE 802.3,IEEE 802.3u,IEEE 802.3xIEEE 802.3af,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n
- 12 V DC, 1 A
- 100 - 240 V AC, 50 - 60 H
- 128 x 60 mm (5 x 2.4 in.)
- 0 - 45°C (32 - 113°F)
لم يتم العثور على أي تقييمات